“”

1/4" Shoulder Diam x 1/2" Shoulder Length, #10-24 UNC, Hex Socket Shoulder Screw;8 Alloy Steel, 0.357 to 3/8" Head Diam

14-1/4" Long Black Nylon Standard Cable Tie

30" OAL Chrome Pry Bar 7/8" Wide

3/16" Diam x 1" Long Coiled Spring Pin;Grade 1070-1090 Alloy Steel, Black Oxide Finish

1" Diam, 6' Long, 1018 Steel Keyed Round Linear Shafting 1/4" Key

Pipe Marker with Compressed Air Legend and Arrow Graphic 2-1/2 to 3-1/4" Pipe Outside Diam, White on Blue

Replacement Conveyor Roller for 21-7/8 Inches Between Frame 1.9 Inch Diameter, 7/16 Inch Axle, Galvanized Steel Finish, 16 Gage

3/8" Diam x 4" Long Extended Prong Cotter Pin, 18-8 Stainless Steel, Uncoated

1/2-13 UNC Hex Low Socket Cap Screw;4037 Alloy Steel, Black Oxide, Fully Threaded, 1" Length Under Head

1/2" Diam Tool Steel W-1 Water Hardening Drill Rod 36" Long

7.562" Long Black Nylon Standard Cable Tie

KL-34L, 3/8" Inscribed Circle, 5/64" Hex Socket, #10-32 Thread, Negative Lock Pin for Indexable Turning Tools 0.51" OAL

Pipe Marker with Return Legend and Arrow Graphic 1 to 2-1/2" Pipe Outside Diam, White on Blue

24 x 24 x 2", MERV 10, 55% Efficiency, Wire-Backed Pleated Air Filter Synthetic, Paperboard Frame, 500 Max FPM, 2,000 CFM, High Capacity, Use with Any Unit

3 Lb Head 1-3/4" Face Copper Nonmarring Hammer 14" OAL, Wood Handle

M12x1.75 Metric Coarse Hex Socket Cap Screw;Grade 12.9 Alloy Steel, Black Oxide, Fully Threaded

7/16-14 UNC Hex Socket 82° Flat Cap Screw;Alloy Steel, Black Oxide, Fully Threaded, 2" Overall Length

#2-56 UNC Hex Socket Cap Screw;A-286 Alloy Steel, Passivated, Fully Threaded, 3/8" Length Under Head

1/2-13 Thread, 1-3/4" Length Under Head, Alloy Steel Hex Head Bolt;Uncoated, UNC Thread, ASTM A193, Grade B7

#4-40 UNC Hex Socket Cap Screw;Alloy Steel, Black Oxide, Fully Threaded, 3/8" Length Under Head

#6-32 UNC, 1/8" OAL, Cup Point Set Screw Grade 303 Stainless Steel, 1/16" Key

36" Long Replacement Handle for Sledge Hammers 1-1/4" Eye Length x 1" Eye Width, Hickory, 6 to 16 Lb Capacity, Material Grade Type A

5/16" 118° High Speed Steel Jobber Drill - Bright Finish, Left Hand Cut, Spiral Flute, Straight Shank, 4-1/2" OAL, Standard Point

14 x 25 x 2", MERV 8, 35% Efficiency, Wire-Backed Pleated Air Filter Synthetic, Paperboard Frame, 500 Max FPM, 900 CFM, Use with Any Unit