“”

0.742" Diam Class ZZ Minus Plug & Pin Gage; Steel, 0.000200" Tolerance

18" Long, 1/100, 1/64, 1/32, 1/10" Graduation, Flexible Steel Rule 5R Graduation Style, 3/4" Wide, Black, Black Chrome Finish

12" Long, 1/64, 1/32" and 0.5, 1mm Graduation, Flexible Steel Rule English/Metric Graduation Style, 1/2" Wide, Silver, Satin Chrome Finish

1/32 to 5/8 Inch Measurement, 1 Leaf Taper Gage 6 Inch Long, 1/64 Inch Graduation

8 Inch Long, Accuracy Up to 0.0002 Inch, Flat End Micrometer Calibration Standard Use with Micrometers, Includes Heat Insulating Handle

14 Inch Long, Accuracy Up to 0.0003 Inch, Spherical End Micrometer Calibration Standard Use with Micrometers, Includes Heat Insulating Handle

0.656" Diam Class ZZ Minus Plug & Pin Gage; Steel, 0.000200" Tolerance

19 Inch Long, Accuracy Up to 0.0002 Inch, Spherical End Micrometer Calibration Standard Use with Micrometers, Includes Heat Insulating Handle

0.001" Graduation, 0-100 Dial Reading, Dial Indicator & Base Kit - 63mm Base Length x 50mm Base Width x 55mm Base Height, 2-1/4" Dial Diam

0.03mm Thick x 25 Ft. Long x 1/2 Inch Wide, Feeler Stock Roll;High Carbon Steel

8" Long, 0.0005" Graduation Sensitivity per 10", 2 Vials, Square Inspection Block Level - Cast Iron, 0.00025" Base Flatness, 1-9/16" Wide x 8" High

0.03" Range, 0.0005" Dial Graduation, Horizontal Dial Test Indicator;1-1/4" White Dial, 0-15-0 Dial Reading, Accurate to 0.0005"

1mm Ball Diam, Steel, Ball Test Indicator Contact Point 0.9" Contact Point Length, Use with Mitutoyo Test Indicators

2mm Ball Diam, Carbide, Ball Test Indicator Contact Point 0.606" Contact Point Length, Use with Mitutoyo Test Indicators

2-1/4 to 3-1/4" Inside Dial Caliper Gage - 0.001" Graduation, 0.038mm Accuracy, 3-1/4" Leg Length, Ball Contact Points

0.06" Range, 0.001" Dial Graduation, Horizontal Dial Test Indicator;1-3/16" White Dial, 0-15-0 Dial Reading, Accurate to 0.0012"

0.31" Diam Class ZZ Plus Plug & Pin Gage; Steel, 0.000200" Tolerance

0.749" Diam Class ZZ Minus Plug & Pin Gage; Steel, 0.000200" Tolerance

2 Piece, 6" Combination Square Set; 1/32 & 1/64" (English/Metric) Graduation, Hardened Steel Blade, Hardened Steel Square Head

2mm Ball Diam, Carbide, Ball Test Indicator Contact Point 2-3/4" Contact Point Length, Use with Interapid Test Indicators

0.227" Diam Class ZZ Minus Plug & Pin Gage; Steel, 0.000200" Tolerance

2 to 12 Inch Range, Carbide Mechanical Inside Tubular Micrometer - 0.001 Inch Graduation, 0.0001 Inch Accuracy

2" Blade Length, 2" Base Length Spring Steel Square 0.0005" (Parallel) & 0.001" (Square) Accuracy

#4-48, 3/16" Diam, Black Oxide Steel Flat Contact Point;1-1/4" Contact Point Length, Use with Dial Indicators